Version B: As version A, but the ball screw is secured against rotation by a square protective sleeve. The load only needs to be applied.
Housing: Made from aluminium alloy in die-cast version. All sides machined. As standard filled with lubricant. Protective tube steel, blank.
Gearing: Worm made from ETG100, Gear made from Gbz12. Due to the high efficiency (low friction between spindle and nut), ball screws are not self-locking. To prevent runback, a brake motor should be fitted, for example.
Spindle: Ball screw material Cf53 rolled, induction hardened 60 ±2 HRC and polished.
The product numbers only refer to the basic gear units without spindle and accessories. Please ask for the price of the complete unit including spindle and accessories as, e.g., flange plate/travelling nut, bellow or coil spring cover, fastening strips.
You will find further dimensions on our catalogue page.
1) Efficiency. Values in brackets for version with higher transmission ratio (slow-running version).
2) Stroke pro full rotation of the input shaft.
3) Required torque at max. load (only under optimum conditions).
služby: katalog další informace návod k obsluze
Dodávané 3D modely, obrázky a technické výkresy jsou vyrobeny s velikou péčí. Přesto je vyloučena odpovědnost za přesnost a správnost těchto údajů.
| číslo výrobku | velkost | zatížení C dynamicky [kN] |
zatížení C0 staticky [kN] |
D4 KGT-vřetena | η1) [%] |
posuv2) [mm] |
MD3) [Nm] |
A1 [mm] |
B2 [mm] |
C2 [mm] |
hmotnost (jen převodovka) [kg] |
|
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4750111605 | CAD | 1 | 6,3 | 11,5 | 16 x 5 | 70,1 (56,0) | 1,25 | 3,2 | 80 | 72 | 62 | 1,2 |
| 4750122005 | CAD | 2 | 7,5 | 14,7 | 20 x 5 | 68,8 (49,3) | 1,25 | 7,0 | 100 | 85 | 75 | 2,1 |
| 4750132505 | CAD | 3 | 8,0 | 16,7 | 25 x 5 | 68,8 (49,3) | 0,83 | 16 | 130 | 105 | 82 | 3,7 |
| 4750133205 | CAD | 3 | 8,9 | 24,3 | 32 x 5 | 68,8 (49,4) | 0,83 | 16 | 130 | 105 | 82 | 3,6 |
| 4750144005 | CAD | 4 | 19,0 | 66,2 | 40 x 5 | 69,6 (53,0) | 0,714 | 34 | 180 | 145 | 117 | 9,4 |
